Unpacking The Evolution X5 Satellite Router Equipment; Components Normally Included In An Order; Figure 3. Db-9 To Rj-45 Adapter And Connector - iDirect evolution x5 Installation Manual

You may need additional tools and equipment to install related equipment and cables. You
may also require test equipment to check signal, power levels, and communication links. See
Section 4.7.1, "Console Port Cable Specifications and Pinout" on page 28 for cable
specifications and RJ-45 pinouts.
4.2 Unpacking the Evolution X5 Satellite Router
Equipment
The Evolution X5 Satellite Router may be shipped in one or more shipping containers,
depending on the type of bundle purchased. Once you have received all of the boxes, perform
the following tasks:
• Ensure the boxes are facing upward. (Refer to the box orientation arrows on the shipping
container.)
• Inspect all shipping containers. If any damage or other signs of mishandling are evident,
inform the carrier and either iDirect or the reseller.
• Remove the tape and any exterior covering from the box lid.
Note: Save the Evolution X5 Satellite Router shipping boxes after you have unpacked
the system. You will need these boxes if you want to move or ship the system in
the future.
Remove items from the box only as needed. Verify that you have received all of the proper
Evolution X5 Satellite Router components and accessory items listed in your order, including
the optional equipment you ordered.
4.3

Components Normally Included in an Order

Prior to installation, ensure that you have received all of the necessary components for a
complete VSAT installation. If any items are missing or damaged, please contact your Network
Operator/Distributor for replacement.
A typical installation includes:
• An Evolution X5 Satellite Router
iDirect Evolution X5 Satellite Router Installation and Safety Manual

Unpacking the Evolution X5 Satellite Router Equipment

Figure 3. DB-9 to RJ-45 Adapter and Connector

17