Using The Wizard For Basic Configuration - HIKVISION DS-7104NI-SL User Manual

User Manual of Network Video Recorder

2.3 Using the Wizard for Basic Configuration

Purpose:
After admin password is set, the setup wizard pops up automatically. It can walk you through some basic settings
of the NVR.
Steps:
1. If you don't want to use the setup wizard at that moment, click the Exit button. You can also choose to use
the Setup Wizard next time by leaving the "Start wizard when the device starts?" checkbox checked.
2. Click the Next button to enter the Date and Time Settings interface.
3. After the time settings, click Next button which takes you back to the Basic Network Setup Wizard
interface.
Figure 2. 5 Start Wizard Interface
Figure 2. 6 Date and Time Settings
31