Detecting Video Loss Alarm - HIKVISION DS-7104NI-SL User Manual

User Manual of Network Video Recorder

8.3 Detecting Video Loss Alarm

Purpose:
Detect video loss of a channel and take alarm response action(s).
Steps:
1. Enter Video Loss interface of Camera Management and select a channel you want to detect.
Menu> Camera> Video Loss
2. Set up handling action of video loss.
Check the checkbox of "Enable Video Loss Alarm", and click
loss.
3. Set up arming schedule of the handling actions.
1) Select Arming Schedule tab to set the channel's arming schedule.
2) Choose one day of a week and up to eight time periods can be set within each day.
3) Click Apply button to save the settings.
Time periods shall not be repeated or overlapped.
4. Select Linkage Action tab to set up alarm response action of video loss (please refer to Chapter Setting
Alarm Response Actions).
5. Click the OK button to complete the video loss settings of the channel.
Figure 8. 9 Video Loss Setup Interface
Figure 8. 10 Set Arming Schedule of Video Loss
122
button to set up handling action of video