Configuring Alarm Triggered Recording - HIKVISION DS-7104NI-SL User Manual

User Manual of Network Video Recorder

5.4 Configuring Alarm Triggered Recording

The alarm triggered recording is not supported by the DS-7100NI-SL(/W) series NVR.
Purpose:
Follow the procedure to configure alarm triggered recording.
Steps:
1. Enter the Alarm setting interface.
Menu> Configuration> Alarm
2. Click Alarm Input tab and set the alarm parameters.
1) Select Alarm Input number and configure alarm parameters.
2) Choose N.O (normally open) or N.C (normally closed) for alarm type.
3) Check the checkbox for Enable.
4) Click Settings.
Figure 5. 12 Alarm Settings
Figure 5. 13 Alarm Settings- Alarm Input
75