Configuring Motion Detection Recording - HIKVISION DS-7104NI-SL User Manual

Hide thumbs Also See for DS-7104NI-SL:
Table of Contents

Advertisement

User Manual of Network Video Recorder

5.3 Configuring Motion Detection Recording

Purpose:
Follow the steps to set the motion detection parameters. In the live view mode, once a motion detection event takes
place, the NVR can analyze it and do many actions to handle it. Enabling motion detection function can trigger
certain channels to start recording, or trigger full screen monitoring, audio warning, notify the surveillance center
and so on. In this chapter, you can follow the steps to schedule a record which triggered by the detected motion.
Steps:
1. Enter the Motion Detection interface.
Menu>Camera>Motion
2. Configure Motion Detection
1) Choose camera you want to configure.
2) Check the checkbox after Enable Motion Detection.
3) Drag and draw the area for motion detection by mouse. If you want to set the motion detection for all the
area shot by the camera, click Full Screen. To clear the motion detection area, click Clear.
4) Click Settings, and the message box for channel information pop up.
5) Select the channels which you want the motion detection event to trigger recording.
6) Click Apply to save the settings.
Figure 5. 10 Motion Detection- Mask
Figure 5. 11 Motion Detection Handling
73

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents