Configuring Privacy Mask - HIKVISION DS-7104NI-SL User Manual

User Manual of Network Video Recorder

11.2 Configuring Privacy Mask

Purpose:
You are allowed to configure the four-sided privacy mask zones that cannot be viewed by the operator. The privacy
mask can prevent certain surveillance areas to be viewed or recorded.
Steps:
1. Enter the Privacy Mask Settings interface.
Menu > Camera >Privacy Mask
2. Select the camera to set privacy mask.
3. Click the checkbox of Enable Privacy Mask to enable this feature.
4. Use the mouse to draw a zone on the window. The zones will be marked with different frame colors.
Up to 4 privacy masks zones can be configured and the size of each area can be adjusted.
5. The configured privacy mask zones on the window can be cleared by clicking the corresponding Clear
Zone1-4 icons on the right side of the window, or click Clear All to clear all zones.
6. Click the Apply button to save the settings.
Figure 11. 2 Privacy Mask Settings Interface
Figure 11. 3 Set Privacy Mask Area
171