Removing The Roll Holder From Rolls - Canon imageprograf IPF785 User Manual

iPF785
7
Holding the Roll Holder flange (a), remove the holder
from the Roll Holder Slot.
• For instructions on removing the Roll Holder from rolls, see "Removing the Roll Holder from
Rolls."
Note
8
Holding it at the positions indicated, close the Roll Cov-
er.
• To load new roll paper in the printer at this point, see "Loading Rolls in the Printer."
Note

Removing the Roll Holder from Rolls

Removing the Roll Holder from Rolls

1
Lift the Holder Stopper lever (a) from the shaft side to
unlock it. Holding the Holder Stopper at the position
indicated (b), remove it from the Roll Holder.
User's Guide
P.347
➔
Removing the Roll Holder from Rolls
P.341
➔
347