Paper Jam; Paper Is Crooked - Canon iPF780 Series Basic Manual

iPF780 Series
Cause
A print job for printing on
sheets was sent when a roll
is loaded.

Paper jam

Paper jam
Cause
A paper jam oc- For roll paper, cut the paper on the upper side of the {Paper Feed Slot.
curred in the
1. Push the Release Lever back and remove the jammed paper.
printer during
(See "Clearing Jammed Roll Paper.")
printing.
(See "Clearing a Jammed Sheet.")
2. Load the paper.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Printer.")
3. Pull the Release Lever forward.
4. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK
button.
Printing will resume, starting from the page on which the error occurred.

Paper is crooked.

Paper is crooked.
Paper loaded crooked was detected when the paper was advanced.
• To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off or Loose
in the Skew Check Lv. setting of the printer menu. However, this may cause jams and printing problems be-
Important
cause paper may be askew when printed. Also, the Platen may become soiled, which may soil the back of the
next document when it is printed.
Basic Guide
2. After removing the roll, load and print on a sheet of the type and size of paper you have specified
in the printer driver.
(See "Removing the Roll from the Printer.")
(See "Loading and Printing on Sheets.")
Press ▲ or ▼ to select Stop Printing, and then press the OK button to stop printing.
➔
➔
Cause
Corrective Action
P.18
➔
User's Guide
➔
Corrective Action
P.84
➔
P.87
P.15
P.21
➔
Follow these steps to reload the roll.
1. Push the Release Lever back.
2.
Adjust the right edge of the roll to make it parallel to the
orange Paper Alignment Line.
3. Pull the Release Lever forward.
(See "Loading Rolls in the Printer.")
If this error recurs after you reload the roll, remove the Roll
Holder from the printer, push the roll firmly in until it touches
the Roll Holder flange, and reload the Roll Holder in the print-
er.
(See "Attaching the Roll Holder to Rolls.")
Follow these step to reload a sheet.
1. Push the Release Lever back.
2. Pull out the sheet.
3.
Pull the Release Lever forward.
4.
Reload the sheet, aligning it with the guide on the right.
(See "Loading Sheets in the Printer.")
Corrective Action
P.15
➔
P.12
➔
P.21
➔
Paper jam
117