Canon imageprograf IPF785 User Manual page 352

Specifying the Cutting Method for Rolls
Manual Choose this setting when using media that cannot
(when us- be cut using the Cutter Unit.
Cut each page from the roll using scissors. For con-
ing media
tinuous printing (if you will cut each page later), se-
that cannot
lect Automatic Cutting > Yes or select Print Cut
be cut with
the Cutter Guideline.
Unit ) (See "Cutting Roll Paper After Printing.")
Paper cut- Choose this option if you want to cut pages by
ting (to pressing Cutter Unit buttons for manual cutting after
have the printing when Automatic Cutting > No is selected
or Print Cut Guideline is selected in the printer
roll cut at
driver.
your speci-
fied posi- Otherwise choose this option if you want to cut the
tion) roll edge after loading a roll.
• Automatic and Eject are valid only when you have selected Automatic Cutting > Yes in the printer driver.
• With Eject, printing does not resume after a series of jobs have been printed continuously until the roll is cut.
Note
• Eject is the preset selection in Cutting Mode for some types of paper. For this paper, we recommend keeping the
preset cutting mode.
Cut rolls manually in the following cases:
Eject (waiting for ink to dry after printing)
• When cutting wide printed documents after ejection, have two people support the documents. If the paper drops,
printed documents may be damaged.
Important
• Do not lift the paper when holding printed documents before cutting. If the paper rises, it may affect the printing
quality or cause rough cut edges.
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to
select the Paper tab (
352
Note
2
Press the OK button. The Paper Menu is displayed.
Cutting Method
).
• If the Tab Selection screen is not displayed, press the Menu button.
Printer Setting
Media
Manual
Menu >
Paper De-
tails >
(Various
Types of
Paper) >
P.137
➔
Cutting
Mode
Cut button Yes
pressed
iPF785
Driver Setting
Automatic
No, Yes, Print
Cutting
Cut Guideline
No, Print Cut
Guideline
User's Guide