Vello FWIRC-C FREEWAVE User Manual page 18

Adjusting Global EV
EV is set globally for both E-TTL
(A:B) and E-TTL (A:B+C) modes.
Note: With select Canon cameras, you
can adjust EV for group C independently
via your Canon camera's menu controls.
For more information on this feature,
refer to your camera's user manual.
On the Commander LCD, global
EV is displayed in decimal form
and can be adjusted from 3.0 to
+3.0 in 1/3-stop increments.
18
To adjust EV via the FreeWave
IR Commander:
1. Make sure the Commander is set to
the desired E-TTL ratio mode.
2. Press the Set button repeatedly until
the EV number blinks, and use the
Left and Right [
] navigation
buttons to adjust the EV.
For information on how to adjust
EV for group C via your Canon
camera's menu controls, refer to
your camera's user manual.
Global EV