Admin Setup - Oki C821 User Manual

A
DMIN SETUP
ITEM
Enter
Password
Network TCP/IP
Setup
IP Version
NetBEUI
NetWare
EtherTalk
Frame Type
IP Address
Set
IP Address
Subnet Mask
Gateway
Address
Web
Telnet
FTP
SETTINGS EXPLANATION
xxxxxxxxxxxx Enter a password to gain entry to the Admin Setup menu.
Password should be from 6 to 12 digits of alpha/numeric
characters (or mix)
The default value is "aaaaaa"
Enable Sets TCP/IP Protocol.
Disable Enable: TCP/IP Protocol is available.
Disable: TCP/IP Protocol is not available.
IP v4 Set up the IP version.
IP v4+v6 Operates with IPv4 for IPv4 (not valid with IPv6).
Operates with both IPv4 and IPv6
Enable Sets Enable/Disable of NETBEUI Protocol.
Disable
Enable Sets Enable/Disable of NetWare Protocol.
Disable
Enable Sets Enable/Disable of EtherTalk Protocol.
Disable
Auto Sets the frame type.
802.2 Netware should be enabled.
802.3
Ethernet II
SNAP
Auto Sets the IP Address setting method.
Manual TCP/IP should be enabled.
xxx.xxx.xxx.xxx Sets the IP Address.
TCP/IP should be enabled.
xxx.xxx.xxx.xxx Sets the Subnet Mask.
TCP/IP should be enabled.
xxx.xxx.xxx.xxx Sets the Gateway (default router) address.
0.0.0.0 means that there is no router.
TCP/IP should be enabled.
Enable Sets Enable/Disable of Web.
Disable Enable: Web/IPP is available.
Disable: Web/IPP is not available.
TCP/IP should be enabled.
Enable Sets Enable/Disable of Telnet.
Disable Enable: Telnet is available.
Disable: Telnet is not available.
TCP/IP should be enabled.
Enable Sets Enable/Disable of FTP.
Disable Enable: FTP is available.
Disable: FTP is not available.
TCP/IP should be enabled.
Menu functions - C821 and C830 > 56