Oki C821 User Manual page 60

ITEM
PCL Setup True
(cont.) Black
Pen Width
Adjust
Tray 2 ID#
Tray 3 ID#
MPTray ID#
IBM PPR Character
Setup Pitch
Font
Condense
Character
Set
Symbol
Set
Letter O
Style
Zero
Character
Line Pitch
White
Page Skip
CR Function
LF Function
Line Length
Form Length
TOF Position
Left Margin
SETTINGS EXPLANATION
On/Off Sets whether to use Composite Black (cmyk mixed) or
Pure Black (K only) for the black (100%) in image data.
OFF: Mode using Composite Black
ON: Mode using Pure Black
(PCL only)
On/Off When minimum width is specified in PCL, sometimes a 1-
dot line, looks broken.
With PEN WIDTH Adjust set to ON, when the minimum
width is specified, the line width will be emphasized so as
to look wider than a 1-dot line.
With PEN WIDTH Adjust set to OFF, the line will appear as
before.
1 ~ 5 ~ 59 Sets the # to specify Tray 2 for the paper feed destination
command (ESC&l#H) in PCL5e emulation.
(Displayed only if Tray 2 is installed).
1 ~ 20 ~ 59 Sets the # to specify Tray 3 for the paper feed destination
command (ESC&l#H) in PCL5e emulation.
(Displayed only if Tray 3 is installed).
1 ~ 4 ~ 59 Sets the # to specify the MP tray for the paper feed
destination command (ESC&l#H) in PCL5e emulation.
10 CPI Specifies character pitch in IBM PPR emulation.
12 CPI
17 CPI
20 CPI
Proportional
12CPI to Specifies 12CPI pitch for Condense Mode.
20CPI
12CPI to 12CPI
SET-2 Sets a character set.
SET-1
IBM-437 Sets the Symbol Set for IBM PPR (see machine operator
panel for complete list).
Enable/Disable Specifies the style that replaces ø (9B) and ¥ (9D) with ø
(ou) and Ø (zero).
Normal/Slashed Specifies the style of 0(zero). SLASHED: SLASH ZERO
6/8 LPI Sets line space.
On/Off Sets whether to eject a blank sheet. Available only when
simplex is set.
CR/CR+LF Sets action when CR code is received.
LF/LF+CR Sets action when LF code is received.
80/136 column Specifies the number of characters per line.
11/11.7/12 inch Specifies the length of paper.
0.0/0.1/~1.0 Sets the position from the top edge of paper.
inch
0.0/0.1/~1.0 Sets the amount to shift the horizontal print start position
inch to the right.
Menu functions - C821 and C830 > 60