Oki C821 User Manual page 64

C800 series
Table of Contents

Advertisement

ITEM
HDD Setup
Format
(cont.)
Partition
System
Near Life
Setup
Status
Near Life
LED
Change
New
Password
Password
Verify
password
Settings
Reset
Settings
Save
Settings
SETTINGS
EXPLANATION
PCL
Formats a specified partition.
Common
When the Enter button is pressed, the following
confirmation message appears.
PS
Are You Sure? Yes/No
If No is selected, you will return to the previous menu.
If Yes is selected, the following confirmation message
appears.
Execute Now? Yes/No
If No is selected, you will return to the previous menu.
The request to execute partition formatting is put into the
memory and formatting will be executed at next power
cycle.
If Yes is selected, shutdown takes place and the partition
is formatted at power Off/On cycle.
In Non-PS machines, PS is replaced by Common, so the
message is displayed as "PCL/Common/Common".
Enable/Disable
Sets the LCD display control whennear life warning of a
drum, fuser or trancfer belt occurs.
ATTENTION LED is lit if ENABLED
Enable/Disable
Controls the settings of the Attention LED when near end
of life warning of toner, drum, fuser, or belt occurs.
Attention LED is lit when enabled, not lit if disabled.
(Displays LCD message.)
The temporary recovery by opening and closing of the
cover in Life error is not included.
xxxxxxxxxxxxxx
Sets a new password to enter Admin Setup menu
From 6 to 12 alpha/numeric digits can be entered.
xxxxxxxxxxxxxx
Forces the User to input the new password to enter Admin
Setup.
From 6 to 12 alpha/numeric digits can be entered.
Execute
Resets EEPROM of CU. Resets User menu to the factory
default.
If Execute is selected, exits from the menu.
Execute
Saves menus currently set. With this function, the menus
with which operation was last performed are saved, and
overwrites with them menus that were previously saved.
When the Enter button is pressed, the following
confirmation message appears.
Are You Sure? Yes/No
When No is selected, the preceding menus are restored.
When Yes is selected, the current menu settings are
saved and this menu is exited.
Menu functions - C821 and C830 > 64

Advertisement

Table of Contents
loading

This manual is also suitable for:

C801C810C830C800 series

Table of Contents