Shutdown Menu - Oki C821 User Manual

ITEM
System Adjust
(cont.)
S
HUTDOWN MENU
This menu only appears if the hard disk drive is installed.
This item should always be selected before switching the printer off, to ensure that no hard
disk data is lost.
If using the Operator panel button instead, keep pressed for approximately 5 seconds
ITEM
Shutdown Start
ACTION
Print Position Adjust
Default: 0.00
Paper Black
Settings -2/-1/0/+1/+2
Default: 0
Paper Color
Settings -2/-1/0/+1/+2
Default: 0
Trans. Black
Settings -2/-1/0/+1/+2
Default: 0
Trans. Color
Settings -2/-1/0/+1/+2
Default: 0
SMR Setting +3/+2/+1/-1/
-2/-3/
Default: 0
BG Setting +3/+2/+1/-1/
-2/-3/
Default: 0
Drum Cleaning
Default: Off
Hex Dump Execute
SETTINGS
Execute
Menu functions - C821 and C830 > 55
EXPLANATION
Select from X Adjust/Y Adjust/Duplex X
Adjust/Duplex Y Adjust (default condition
indicated by *). Select by scroll and Enter
button. Define measurement.
Used for fine adjustment of the black print on
paper.
Used for fine adjustment of the colour print on
paper.
Used for fine adjustment of the black print on
transparencies.
Used for fine adjustment of the colour print on
transparencies.
To correct variations in print results caused by
temperature/humidity conditions and difference
in print density/frequency.
Change the setting when print quality is
uneven.
To correct variations in print results caused by
temperature/humility conditions and difference
in print density/frequency.
Change the setting when background is dark.
Sets whether to rotate the drum in idle prior to
printing in order to reduce horizontal white
lines.
Be warned that this will shorten the ID life by as
much as this rotation (default condition
indicated by *). Select by scroll and Enter
button.
Prints out data received from the host PC in the
hexadecimal Dump. Turning off the power
supply switch restores Normal Mode.
EXPLANATION
Performs controlled shutdown of the printer,
ensuring that all files on the internal hard disk are
closed before power is turned off. Only power the
printer off when the display indicates that
shutdown is complete.