Administrator Boot Menu - Oki C821 User Manual

C800 series
Table of Contents

Advertisement

A
(
DMINISTRATOR
BOOT
This menu should only be changed by the System Administrators. In order to gain access
to this menu, follow the instructions in
page
49.
This menu is in ENGLISH only (default settings in bold type).
Parallel setup
This menu controls the operation of the printer's Parallel data interface.
ITEM
Enter Password
Parallel
Bi-Direction
ECP
ACK Width
ACK/Busy Timing
I-Prime
Offline Receive
USB setup
This menu controls the operation of the printer's USB data interface.
ITEM
USB
Speed
Soft Reset
Offline Receive
Serial Number
)
MENU
SETTINGS
xxxxxxxxxxxx
Enable / Disable
Enable / Disable
Enable / Disable
Narrow/
Medium/
Wide
Ack in Busy /
Ack while Busy
Disable/
3µsec/50µsec
Enable / Disable
SETTINGS
Enable / Disable
12 / 480 Mbps
Enable / Disable
Enable / Disable
Enable / Disable
Menu functions - C821 and C830 > 66
"How to change the settings - Administrator" on
EXPLANATION
Enter a password to gain entry to the Admin menu.
Password should be from 6 to 12 digits of alpha/numeric
characters (or mix)
The default value is "aaaaaa"
The printer will restart after the Boot Menu.
Enables or disables the parallel port.
ENABLE/DISABLE the bi-directional capability of the
parallel interface.
Extended Capabilities Port, enables/disables this
function.
Sets ACK width for compatible reception.
= 0.5µs
= 1.0µs
= 3.0µs
Sets the order to output the BUSY and ACK signal for
compatible reception.
Sets time to enable/disable I-prime signal
To Enable/disable of this function. When set to Enable,
the interface retains a receive possible state even when
switching to Offline. Interface sends the BUSY signal only
when the receive buffer is full or a service call occurs.
EXPLANATION
ENABLES / DISABLES the USB port.
Selects the interface speed. After setting change the
menu, the printer restarts on exit.
Enables or disables the SOFT RESET command.
OFFLINE RECEIVE.
Specifies whether to ENABLE or DISABLE a USB serial
number.
The USB serial number is used to identify the USB device
connected to your PC.

Advertisement

Table of Contents
loading

This manual is also suitable for:

C801C810C830C800 series

Table of Contents