ATTO Technology Diamond Storage Array VT-Class Installation And Operation Manual page 91

Asymmetric Model
3 hosts, 1 metadata controller (also a host), RAID 5
with 3 LUNs. All zone commands except ZoneCommit
affect only the planned configuration. ZoneCommit
ZoneClearAll
ZoneCreate zone_1
ZoneAddHost zone_1 20:00:00:10:86:00:01:34
ZoneAddHost zone_1 20:00:00:10:10:10:86:01
ZoneAddDevice zone_1 1 2
ZoneAddPort zone_1 0
ZoneCreate zone_2
ZoneAddHost zone_2 20:00:00:60:32:01:02:12
ZoneAddHost zone_2 20:00:00:10:10:10:86:01
ZoneAddDevice zone_2 1 2
ZoneAddPort zone_2 0
ZoneCreate zone_3
ZoneAddHost zone_3 20:00:00:08:11:01:22:22
ZoneAddHost zone_3 20:00:00:10:10:10:86:01
ZoneAddDevice zone_3 3
ZoneAddPort zone_3 1
ZoneState zone_1 enabled
ZoneState zone_2 enabled
ZoneState zone_3 enabled
ZoneCommit
sets the Planned Configuration into the Active
Configuration.
Clears any previously defined zones
Creates a zone named zone_1
Adds host 1 WWPN to zone_1
Adds metadata controller host WWPN to zone_1
Adds LUN 1 and LUN 2 to zone_1
LUN 1 and LUN 2 will be available through HIC 0 for only the
hosts in zone_1
Creates a zone named zone_2
Adds host 2 WWPN to zone_2
Adds metadata controller host WWPN to zone_2
Adds LUN 1 and LUN 2 to zone_2
LUN 1 and LUN 2 will be available through HIC 0 for only the
hosts in zone_2
Creates a zone named zone_3
Adds host WWPN to zone_3
Adds metadata controller host WWPN to zone_3
Adds LUN 3 to zone_3
LUN 3 will be available through HIC 1 for only the hosts in zone_3
Enables Zone_1.
Enables Zone_2.
Enables Zone_3.
Sets the Planned Zoning Configuration into the Active
configuration. No other LUNs will be available to any host.
A-x
Appendix