ATTO Technology Diamond Storage Array VT-Class Installation And Operation Manual page 29

to an initiator that specifies an incorrect Buffer
ID, Mode, Length or Buffer Offset. The Mode is
Exhibit 4.1-2 The SCSI command process: reserve the Diamond-VT, send the command, release the Diamond-VT.
Goal: reserve the Diamond-VT for an in-band CLI command
SCSI cdb: Reserve LUN 0
Goal: retrieve the Diamond-VT temperature via in-band CLI
1. Issue the command:
SCSI cdb: WriteBuffer LUN 0, bid='AA', "get Temperature\n"
2. Retrieve the results:
SCSI cdb: ReadBuffer LUN 0, bid='AA'
Goal: release the Diamond-VT for other in-band users
SCSI cdb: Release LUN 0
Initiator/Host
always Data (0x2), the Buffer ID is always 0 and
the Buffer Offset is always 0.
=>
<= SCSI success
=> places "Temperature=28C\n\r" into
the read-data buffer
<= SCSI success
=>
<= Returns "Temperature=28C\n\r" from
the read-data buffer
<= SCSI success
=>
<= SCSI success
Diamond-VT
18
In-band CLI