ATTO Technology Diamond Storage Array VT-Class Installation And Operation Manual page 8

7.0 Configuring the Diamond-VT ..........................................................47
RAID Level 10
RAID Level 5
Virtual Tape Volumes
Hot Spare sleds
Zones
Interleave
Enhancing performance
7.1 Virtual Tape ............................................................................49
Configuration examples
7.2 Optional Hot Spare Sled .......................................................50
7.3 Zones ......................................................................................51
Principles of Zoning
Factors to consider
Status and Sense Data
Configuring Zoning
Errors
8.0 Updating Firmware ..........................................................................55
Updating firmware via the RS-232 serial port
Updating firmware via the optional Ethernet card
9.0 Diagnostics, Upgrade and Maintenance ........................................57
9.1 Troubleshooting ....................................................................61
Windows 2000 special instructions
Error Messages
Command Line Interface messages
Specific situations and suggestions
9.2 Resetting Defaults .................................................................63
Default
Return to Default settings
Factory Default
9.3 Rebuilding RAID Level 5 and 10 Configurations ................65
10.0 Hardware Maintenance ..................................................................67
10.1 Hot Swap Operating Instructions ......................................69
Disk Drives
Power Supplies
Blower Assemblies
ATTO Technology Inc.