ATTO Technology Diamond Storage Array VT-Class Installation And Operation Manual page 90

Appendix D Sample Zoning Command Sequences
First time configuration (after download)
QuickRAID under Zoning "first time" configuration,
an all/all/all configuration in the selected QuickRAID
configuration. All zone commands except
ZoneClearAll Clears any previously-defined zones
ZoneCommit Sets the new zoning configuration.
Simple configuration
2 hosts. Hosts can use different operating systems. All
zone commands except ZoneCommit affect only the
ZoneClearAll
ZoneCreate zone_1
ZoneAddHost zone_1 20:00:00:10:86:00:01:34 Adds host WWPN to zone_1
ZoneAddDevice zone_1 1 4
ZoneAddPort zone_1 0
ZoneCreate zone_2
ZoneAddHost zone_2 20:00:00:60:00:00:12:34 Adds host WWPN to zone_2
ZoneAddDevice zone_2 7
ZoneAddPort zone_2 1
ZoneState zone_1 enabled
ZoneState zone_2 enabled
ZoneCommit
Symmetric Model
1 host, 1 switch. All host ports travel through a switch
to both Diamond ports. Zoning is not required, since
there is no reason to restrict host/HBA/Port access. All
ZoneClear all Clears any previously-defined zones from the planned configuration
ZoneCommit Copies what is in the Planned Zoning Configuration to the Active Configuration: in this case, clears
any previously-defined zones.
A-ix
ATTO Technology Inc. Diamond Storage Array Installation and Operation Manual
ZoneCommit affect only the planned configuration.
ZoneCommit sets the Planned Configuration into the
Active Configuration.
planned configuration. ZoneCommit sets the Planned
Configuration into the Active Configuration.
Clears any previously defined zones from the planned
configuration.
Creates a zone named zone_1
Adds LUN 1 and 4 to zone_1
LUN 1 and LUN 4 will be available through HIC 0 for only the host
in zone_1
Creates a zone named zone_2
Adds LUN 7 to zone_2
LUN 7 will be available through HIC 1 for only the host in zone_2
Enables zone_1.
Enables zone_2.
Sets the Planned Zoning Configuration into the Active
configuration. No other LUNs will be available to any host.
zone commands except ZoneCommit affect only the
planned configuration. ZoneCommit sets the Planned
Configuration into the Active Configuration.