Nose Assembly Selection Chart - Gage Bilt GB740 Installation Manual

FASTENER
MS20600 SERIES
MS/9SP/PT
NUT PLATE
BACR15CC/CF/DA/DR
OLYMPIC LOK
BULB LOK
NAS1398A, NAS1399A
NAS1738A, NAS1739A
CHERRYLOCK® 'A'
CHERRYLOCK
NAS1398, NAS 1399
NAS1738, NAS 1739
GROUND STUD
M83454
BACS53B1EA1/2
CHERRYLOCK® IS A REGISTERED TRADEM ARK OF CHERRY AEROSPACE. M ONEL® IS A REGISTERED TRADEM ARK OF SPECIAL M ETAL CORPORATIONS.
GAGE BILT CERTIFIES THE GB740 WILL INSTALL THE ABOVE FASTENERS
1) REQUIRES 740715 ADAPTER.
2) RIGHT ANGLE NOSE ASSEMBLIES MAY REQUIRE MORE THAN 1 PULL.
3) 1/4 DIAMETER ALUMINUM & MONEL® ONLY.
4) THRU 3/16 DIAMETER ONLY.
*ALL COUNTERSUNK 'C' NOSE ASSEMBLIES MAY BE USED TO INSTALL BOTH UNIVERSAL AND COUNTERSUNK HEAD RIVETS.
GB740 - SELECTION CHART
DIA. STRAIGHT
1/8 4C-740B-52
5/32 5C-740B-52
3/16 6C-740B-52
1/4 8C-740B-52
1/8 4A-740B-52
5/32 5A-740B-52
3/16 6A-740B-52
1/4 8A-740B-52
1/8 4C-640-64
5/32 5C-640-64
3
3/16 6C-640-64
4
1/4 8C-640-64
8/32 GS8-715B-43
NOTE: THE LAST 2 DIGITS OF THE NOSE ASSEMBLY REPRESENTS THE LENGTH THE NOSE
EXTENDS FROM THE TOOL I.E. -52 = 5.2 INCHES
RIGHT ANGLE
4C-715-54RA
5C-715-54RA
6C-715-54RA
4A-715-54RA
5A-715-54RA
6A-715-54RA
GS8-715-54RA
1
11
OFFSET
1, 2
4C-715-40OS
5C-715-40OS
6C-715-40OS
4A-715-40OS
5A-715-40OS
6A-715-40OS
GS8-715-40OS
1
5/12
Rev. 3/13