Table of Contents
Advertisement
3. Installation
This chapter contains step-by-step instructions for installing, connecting and
verifying that the CrossFire 8730 Switch is operating properly.
Installation Summary
The installation sequence is listed in the steps below.
1. Plan for installation.
— Read Chapter 2, "Preparing for Installation".
— Make sure you read "Required Network Preparation - Frame Length
Limit" on page 22.
2. Unpack the switch.
3. Gather the materials.
4. Mount the switch.
5. Connect the switch to the network.
6. Verify the operation of the switch.
7. If you will be customizing the configuration of the switch or monitoring its
activity, configure the switch. Refer to Chapter 4, "Switch Access" in this guide
and to the
Ethernet Translation Switch—Reference Guide .
CrossFire 8730 Switch Installation Guide, DOC-7046 v. 1.2
"Switch Configuration"
chapter in the on-line
CrossFire 8730 Fast
Installation
25
Advertisement
Table of Contents
Troubleshooting
