Installation; Setting Up The Router - Olicom ADSL Router A400A User Manual

1. Setting up the router

ADSL Service
Port on Wall
RJ-11 cable
The location environment
Place the router in a location where air can circulate freely around it.
The router case has vents on top cover and its sides. Leave at least
two (2) inches of clearance between the vents on the both sides of the
router and any object that might restrict air flow. Never operate the
router when its vents are covered or obstructed.
Connect your Wide Area Network
Plug one end of the phone cable in the port labeled LINE on the rear
panel of router until you feel it lock and connect the other end of line
to your ADSL wall jack.
Connect the CONSOLE port
The CONSOLE port lets you connect the router to a personal computer
through the console cable to configure, administer and monitor your
ADSL router setting with Graphic User Interface (GUI). (described in the
chapter of Configuration on page 10)

Installation

External Filter
DB-9 to RJ-14 Console cable
RJ-45 Ethernet cable
Adapter
6