Olicom CrossFire 8730 Installation Manual page 20

Fast ethernet translation switch
Hide thumbs Also See for CrossFire 8730:
Table of Contents

Advertisement

10
- ARE (All-Routes Explorer), STE (Spanning Tree Explorer)
source routed frames
- unknown destination frames
- frames with the MAC header broadcast bit set
Management
Extensive and sophisticated network management:
— SNMP management
— Out-of-band management via Telnet and VT100 consoles
— Graphical management application for HP OpenView for Windows 95 and
Windows NT (for information on additional management applications for
Unix, please contact your local Olicom representative)
Support for RMON (Remote Monitoring) and standard MIBs
Network statistics
LAN probe port mirroring
Fault isolation and detection
Download via TFTP (Trivial File Transfer Protocol) or X-modem of new
switch microcode
Up- and download of switch configuration via TFTP
Scalability and High Availability
Up to 5,500 active local LAN stations per group of four Token-Ring ports
(1-4, 5-8, 9-12, 13-16, 17-20)
Up to 15,000 active LAN stations per Fast Ethernet port
A maximum of 10,000 active local LAN stations per switch
Stackable architecture
Optional redundant power supply
Installation
Rack or surface mounting
Plug-and-Play for transparent forwarding:
— Automatic learning of network configuration
— Transparent to high-level protocol
Automatic sensing and configuration of ports
CrossFire 8730 Switch Installation Guide, DOC-7046 v. 1.2
Introduction

Advertisement

Table of Contents
loading

Table of Contents