Back Panel Details
This is the back panel of the CrossFire 8730 Switch:
Figure 3. The Back Panel
Table 3 lists the back panel connectors on the switch.
Name
AC connection
Redundant power
supply
Table 3. Back Panel Connectors
CrossFire 8730 Switch Installation Guide, DOC-7046 v. 1.2
AC connection
Standard AC power connection.
Connector for the optional redundant power supply unit.
Redundant Power Supply
~ LINE 50/60Hz
EXTERNAL DC SUPPLY
100-127VAC, 1.5A
200-240VAC, .75A
HIGH VOLTAGES
For selection of power cord
POWER SUPPLY COVER
set please refer to the manual
MAY ONLY BE REMOVED BY
"Guide to Operations"
AUTHORIZED PERSONNEL
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions. (1) This device may not cause
LISTED
harmful interference, and (2) this device must
C
I. T. E.
accept any interference received, including
3C04
interference that may cause undesired operation.
Description
7
Introduction