Unpacking And Inspecting - Olicom CrossFire 8730 Installation Manual

Unpacking and Inspecting

Immediately after receiving the equipment, examine all shipping containers and
contents for damage. If any damage has occurred, notify the shipping carrier.
Unpack the unit by removing the packing material and lifting it from its protective
enclosures. Visually examine the equipment and check the container for related
parts and accessories. You should have the following items:
•
One CrossFire 8730 Fast Ethernet Translation Switch
•
One printed guide, the CrossFire 8730 Fast Ethernet Translational Switch—
Installation Guide (this guide).
•
Two pdf files enclosed on a cd-rom, containing the following two on-line
guides:
—
CrossFire 8730 Fast Ethernet Translation Switch— Reference Guide.
— An on-line version of this guide, the CrossFire 8730 Fast Ethernet
Translational Switch—Installation Guide .
Note that the on-line version of the installation guide may be of a
later date than the printed version (see the version number v. 1.X ).
•
One OC-8830 Token-Ring Switch Program Disk Set
•
One OC-8840 Token-Ring Switch Manager for HP OpenView for Windows
(also works as stand-alone without HP Open View under Windows).
•
One CrossFire 8600 Series Token-Ring Switch Manager
for HP OpenView for Windows—Guides to Operations
•
One serial cable for the management port
•
One plastic bag containing four adhesive rubber feet and rack mounting
screws, Allen key, nuts and washers.
Report any missing parts and any damage not related to shipping to your customer
service representative.
Note: Keep the packing materials for future use. All components returned under
warranty should be shipped in their original packing materials.
If you have received your equipment before your site is fully prepared, after
inspection, you should keep all of the components in the original shipping
containers and store them in a physically and environmentally safe place.
CrossFire 8730 Switch Installation Guide, DOC-7046 v. 1.2
21
Preparing for Installation