Other Problems - ECOVACS ECO D54 Instruction Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 80

14. OTHER PROBLEMS

1) How long is the reserve time for robot
to seek for charger?
It takes time for robot to seek for the char-
ging block. The reserve time differs from
the ground situation. Maximum reserve
time is 10 minutes.
2) Is it allowed for the robot to work inde-
pendently without taking care of?
Answer: Yes. However, you should keep
person in the room informed about robot
operating to avoid tipping.
3) What kind of equipment inside the robot
is used for dealing with failure?
Answer: It is equipped with photosensitive
components which can detect the stair
over the height of 8 centimeters; for fear
that it would fall over.
4) Is robot able to clean the bottom of the
furniture?
Answer: It is flat design, during normal cle-
aning, it can go into table and bed corner
whose height is over 10 centimeters, such
as bed, wardrobe, sofa and tea table.
5) How long is the use life of chargeable
battery?
Answer: Under normal circumstance, it can
be recycled over 500 times.
6) Why does robot fail to work under set
mode?
Answer: Because when there is low
battery, it will do back to charging mode
automatically.
7) What's the cleaning coverage once it is
charged full?(under automatic cleaning
mode)
Answer: Under normal circumstance, it is
around 60 - 80 sq, but it differs from the
ground situation.
8) Why does robot stop working once it
meets obstacle?
Answer: Under normal circumstance,
robot will return or seek other route when
it meets obstacle. However, if it controlled
by remote control, it is not able to change
route in case of obstacle.
9) Why there is garbage leaking from the
machine while robot operating?
Answer:
a. Please check whether there is too
much garbage in dust box (if there is
too much dust on the floor, robot is
not able to alarm after working for
some time even though there is too
much garbage in dust box.). That's
why you need to clean dust box.
b. See whether main brush is not
cleaned for long time, as it is tangled
with much hair and dust.
10) Why does robot fail to start cleaning
on appointment time?
Answer:
a. Confirm whether there is much
remaining battery. Appointment
timing is not applicable when robot
is returning to charge after operating
cleaning.
b. Check if robot is under standby status.
ENG
Enjoy Smarter Life
ENG - 103

Advertisement

Table of Contents
loading

Table of Contents