Setup Procedure; For Network Connection; For Local Connection - Konica Minolta bizhub 36 User Manual

2.3

Setup procedure

2.3 Setup procedure
To use this printing system, you must complete the setup in advance.
The setup refers to a series of procedures for connecting the machine to the computer and installing the print-
er driver to the computer.
Perform the setup using the following procedures.
2.3.1

For network connection

1
Connect this machine to the computer.
2
Check that the computer to be used is connected to the network.
3
Specify the IP address of this machine, and then connect it to the network.
4
Change the network settings for this machine according to the connection method or protocol.
% LPR: In [TCP/IP Settings], enable LPD. (LPD is enabled in the initial setting.)
% Port9100: In [TCP/IP Settings], enable the RAW port and specify the RAW port number ([9100] in
the initial setting).
% IPP/IPPS: In [IPP Settings], enable IPP printing. To use IPPS printing, install the certificate in ad-
vance.
% Web Service Print: In [Web Service Settings], enable the [Print Function].
% Bonjour: In [Bonjour Setting], enable Bonjour.
% AppleTalk: In [AppleTalk Settings], enable AppleTalk.
5
Install the printer driver.
% Specify the network port for the printer driver according to the connection method or protocol.
Reference
- After installing the printer driver, perform test print to make sure that the connections are made prop-
erly.
d
Reference
For details on the connectable interfaces, refer to page 2-7.
For details on the network settings, refer to the [User's Guide Administrator Operations].
The procedure for installing the printer driver varies depending on the connection method, operating system
of the computer, and printer driver. For details, refer to page 3-2.
To update an existing printer driver, uninstall it first. For details, refer to page 9-2.
Configure the interface timeout settings in the PageScope Web Connection if necessary. For details, refer
to the [User's Guide Administrator Operations].
2.3.2

For local connection

1
Connect this machine to the computer.
2
Install the printer driver.
bizhub 42/36
2
2-8