Windows Xp/Server 2003; For Network Connection (Lpr/Port9100) - Konica Minolta bizhub press C7000 User Manual

5.2

Windows XP/Server 2003

5.2 Windows XP/Server 2003
5.2.1

For network connection (LPR/Port9100)

To use LPR/Port9100 printing, specify the port while installing the printer driver.
Settings for the machine
To use Port 9100 or LPR printing, you must configure the network settings for the machine in advance.
Items to be configured
IP Address
RAW port number
LPD Setting
d
Reference
For details on the network settings for this machine, refer to [User's Guide - POD Administrator's Reference].
Installing the printer driver using the Add Printer Wizard
0 Installing the driver to Windows XP/Server 2003-based computers requires the administrator authority.
1
Insert the Driver CD-ROM into the CD-ROM drive.
2
Click [Start], and then select [Printers and Faxes].
% If [Printers and Faxes]is not displayed in the [Start] menu, open [Control Panel] from the [Start] menu,
click [Printers and Other Hardware], then click [Printers and Faxes].
3
In Windows XP, select [Add a printer] from the [Printer Tasks] menu.
In Windows Server 2003, double-click [Add Printer].
In Windows XP:
In Windows Server 2003:
bizhub PRESS C7000/C7000P/C6000/C70hc
Description
In [TCP/IP Settings] of this machine, specify the IP address.
To use Port 9100 printing:
In [TCP/IP Settings] for the machine, enable the RAW port number
(initial setting: [9100]).
To use LPR printing:
In [LPD Setting] for the machine, enable LPD printing.
5
5-15