Konica Minolta bizhub press C7000 User Manual page 122

11.3 Parameter details
Function Name
[PostScript Lan-
guage Level]
[Send PostScript
Error Handler]
[Mirrored Output]
[Color Configura-
tion]
[Screening
(Text/Graphics)]
[Screening (Im-
age)]
[Feed Direction]
[Offset]
[Print Position
Setting]
[Weight]
[Colored Paper]
[Pre-Punched]
[Output Tray]
[Face Up]
[N to 1]
[Pile Permission]
[Binding Position]
[Print Type]
[Imposition]
[Staple]
[Punch]
bizhub PRESS C7000/C7000P/C6000/C70hc
Option
1 - 3
[Yes], [No]
[Yes], [No]
[No Setting], [Image Controller De-
fault]
Dot 1 - 2, Line 1 - 2, Stochastic
Dot 1 - 2, Line 1 - 2, Stochastic
[Auto], [Long Edge], [Short Edge]
Off, On
[Off], [Left], [Center], [Right]
No Setting,
2
64-74g/m ,
2
75-80g/m ,
2
81-105g/m ,
2
106-135g/m ,
2
136-162g/m ,
2
163-209g/m ,
2
210-256g/m ,
2
257-300g/m
[White], [Non-White]
Off, On
[Default], [Stapler Main Tray], [Stapler
Sub Tray], [Stacker Auto], [Stacker 1
Main Tray], [Stacker 1 Sub Tray],
[Stacker 2 Main Tray], [Stacker 2 Sub
Tray], [Saddle-Stitcher Sub Tray],
[Multi Folder Main Tray], [Multi Folder
Sub Tray], [Perfect Binder Sub Tray]
Off, On
Off, On
Off, On
[Left Bind], [Top Bind], [Right Bind],
[Left Bind (Landscape)], [Top Bind
(Landscape)], [Right Bind (Land-
scape)]
[1-Sided], [2-Sided]
[Off], [Booklet], [Adhesive Binding], [2
in 1], [Repeat], [2 Repeat Reversal
(Left)], [2 Repeat Reversal (Right)], [2
Repeat Reversal (Top)], [2 Repeat
Reversal (Bottom)], [4 Repeat]
[Off], [Left Corner], [Right Corner], [2
Positions]
[Off], [2-Hole], [3-Hole], [4-Hole],
[Multi Punch]
Description
Set a PostScript language level.
Set whether to send a PostScript error
handler or not.
Set [Mirrored Output].
Set whether to use the color configuration
in the image controller or not.
Set screening for a text and graphic.
Set screening setting for an image.
Set a direction to feed paper.
Offsetting by each set at printing.
Specify the print position.
Set weight of output paper.
Specify color of output paper.
Select this check box to print on pre-
punched paper.
Select an output tray.
Set this to output printed paper with its
face up.
Set this to print an original in a reverse or-
der.
Set this to allow to pile up when there is a
printed document on a stacker.
Set a position to bind when using a func-
tion such as [Staple] and [Punch].
Select whether to print in 2-sided mode.
Set this to perform an imposition printing.
Set this to staple paper.
Set this to punch paper.
11
11-7