Configuring The Ipp Settings - Konica Minolta bizhub press C7000 User Manual

6.1 Mac OS X 10.4/10.5/10.6
8
Click [Add].
When the selected printer is registered in the [Print & Fax], the setting procedure is completed.
Reference
- For OS X 10.4, you can also add a printer by clicking [Add] in the [Printer Setup Utility] window.

Configuring the IPP settings

[TCP/IP Settings] for the machine
Specify the IP address for the machine.
Configuring [HTTP Server Setting] for the computer
In [HTTP Server Setting] for the machine, enable IPP printing.
d
Reference
For details on specifying the IP address for the machine, refer to [User's Guide - POD Administrator's Refer-
ence].
For details on [HTTP Server Setting] for this machine, refer to [User's Guide - POD Administrator's Reference].
Configuring [ TCP/IP Setting] for the computer
Configure the TCP/IP settings for the Macintosh computer connected to the printer.
1
In the [Apple Menu], select [System Preferences...].
2
Click the [Network] icon.
3
The Ethernet setting window appears.
% For OS X 10.5/10.6, select [Ethernet], and then click [Advanced...].
% For OS X 10.4, select [Built-in Ethernet], and then click [Configure...].
4
Click the [TCP/IP] tab.
5
Configure the settings including the IP address and subnet mask according to the settings of the net-
work to which the Macintosh computer is connected.
6
Click the close button at the top left corner of the window.
% When the [This service has unsaved changes] message appears, click [Apply].
bizhub PRESS C7000/C7000P/C6000/C70hc
6
6-8