Setup Procedure; For Network Connection - Konica Minolta bizhub C652 User Manual

2.3

Setup procedure

2.3 Setup procedure
To use this printing system, you must complete the setup in advance.
The setup refers to a series of procedures for connecting the machine to the computer and installing the
printer driver to the computer.
Perform the setup using the following procedures.
2.3.1

For network connection

1
Connect this machine to the computer.
2
Check that the computer to be used is connected to the network.
3
Specify the IP address of the machine, and then connect it to the network.
4
Change the network settings for the machine according to the connection method or protocol.
% LPR: In "LPD Setting", enable LPD printing.
% Port 9100: In "TCP/IP Settings", enable the RAW port number (initial setting: "9100").
% SMB: Configure settings of "Print Settings" in "SMB Setting".
% IPP/IPPS: In "IPP Setting", enable IPP printing. To use IPPS printing, install the certificate in
advance.
% Web Service Print: In "Web Service Settings", enable the print function.
% Bonjour: In "Bonjour Setting", enable Bonjour.
% AppleTalk: In "AppleTalk Setting", enable AppleTalk.
5
Install the printer driver.
% Specify the network port for the printer driver according to the connection method or protocol.
6
Install the screen fonts.
% The DVD-ROM contains the European TrueType fonts as "screen fonts". The Screen Font or Screen
Fonts folder in the DVD-ROM contains the screen fonts.
% Install the screen fonts using the standard function for the OS of adding fonts. For details, refer to
Help of the Operating System.
% Macintosh fonts are compressed. Decompress them before installing.
Reference
- After installing the printer driver, perform test print to make sure that the connections are made
properly.
d
Reference
For details on the connectable interfaces, refer to page 2-8.
For details on the network settings, refer to the "User's Guide [Network Administrator]".
The procedure for installing the printer driver varies depending on the connection method, operating system
of the computer, and printer driver. For details, refer to page 3-3.
To update an existing printer driver, uninstall it first. For details, refer to page 7-3.
Configure the interface timeout settings in the Utility menu on the control panel if necessary. For details, refer
to page 12-60.
bizhub C652/C652DS/C552/C452 (Version 2)
2
2-9