Easy Installation Procedure Using The Installer; Settings For The Machine - Konica Minolta bizhub press C7000 User Manual

4.2

Easy installation procedure using the installer

4.2 Easy installation procedure using the installer
4.2.1

Settings for the machine

Before you can use this machine through the network connection, you must configure the network settings
for this machine.
d
Reference
You can set the network settings for this machine in the screen that is displayed by selecting [Utility/Counter]
- [Administrator Setting] - [Controller] - [Controller NIC Setting Menu].
For details, refer to [User's Guide - POD Administrator's Reference].
TCP/IP settings for the machine
In [TCP/IP Settings] of this machine, specify the IP address.
d
Reference
When this machine is connected through the network, you must previously specify the IP address on this
machine so that it can be detected automatically. For details, refer to [User's Guide - POD Administrator's
Reference].
RAW port number/IPP setting for the machine
Change the network settings for this machine according to the connection method or protocol.
- Port9100: In [TCP/IP Settings], enable the RAW port number (initial setting: [9100]).
- IPP/IPPS: In [HTTP Server Setting], enable IPP printing.
d
Reference
For details on TCP/IP setting and IPP setting for this machine, refer to [User's Guide - POD Administrator's
Reference].
Before you can use IPPS printing, you must register a certificate with this machine. You can use the self-
signed certificate that is preinstalled in this machine. For details, refer to [User's Guide - POD Administrator's
Reference].
bizhub PRESS C7000/C7000P/C6000/C70hc
4
4-3