Material Safety Data Sheet - Oki OKIFAX 5050 Handbook

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET MATERIAL SAFETY DATA SHEET MATERIAL SAFETY DATA SHEET MATERIAL SAFETY DATA SHEET
OL "e" Series Toner
MSDS # 58093101
For more information, contact Okidata at:
532 Fellowship Road
Mount Laurel, NJ 08054
Emergency Information: 1-800-OKIDATA
Emergency First Aid Procedures
Emergency
Toner swallowed
(ingested).
Toner inhaled.
Toner gets in
the eyes.
Of5050hw.pm6 84
Procedure
Dilute by giving two glasses of
water and induce vomiting by
administering Syrup of Ipecac
(follow manufacturer's instruc
tions). Seek medical attention.
NEVER give anything by mouth
or attempt to induce vomiting
in a person who is unconscious.
Remove person to fresh air.
Seek medical attention.
Flush eyes with large quantities
of cool water for 15 minutes,
keeping the eyelids open with
fingers. Seek medical attention.
Note Note Note Note Note: Small amounts of toner on skin or clothing can
easily be removed with soap and cold water. Hot water
makes toner harder to remove.
Hazardous Ingredients
Styrene-Butyl Acrylate Copolymer (91% by weight)
CAS# 25767-47-9
3
OSHA TWA 15 mg/m for total dust
ACGIH TLV 10 mg/m 3 for total dust
Carbon Black (5-7% by weight)
CAS# 1333-86-4
OSHA TWA 3.5 mg/m 3
3
ACGIH TLV 3.5 mg/m
Polypropylene (less than 3% by weight)
CAS# 9003-07-0
OSHA TWA 15 mg/m 3 for total dust
3
ACGIH TLV 10 mg/m for total dust
Amorphous Fumed Silica (less than 1% by weight)
CAS# 67762-90-7
3
OSHA PEL 15.0 mg/m for total dust
ACGIH TLV 10.0 mg/m 3 for total dust
Note Note Note Note Note: : : : : This product is not regulated under Section 313 of
SARA, Title III.
Physical Data
Melting Point: 110°C (230°F)
Boiling Point: Not applicable
Vapor Pressure: Not applicable
4/15/98, 9:45 AM