Oki ES 1624n MFP User Manual page 291

Once someone has set up all the necessary overlay files on the
printer, other users only have to switch on the required settings in
the printer driver to use the overlays.
• If the hard disk memory is insufficient for the
spooled data,
copy printed.
• If the software application being used has a collate
print option, this must be turned OFF for overlay to
operate correctly.
• An overlay may consist of more than one
component files.
Creating Documents To Use As Overlays
An overlay can be created in any software application that can
handle logos, letterheads, forms, etc. and can print to a file.
With the file to be stored as an overlay open in your application
1.
program, choose
Ensure that the
2.
application's Print dialog box.
Depending on the application, you may need to select your
3.
printer model, and then click
printer driver settings.
Select the
4. Overlay
Choose
5. Create Form
selections in the dialog box which appears and click
Click .
6. Print
Instead of sending the print job to the printer, this prompts you to
save the print job on your PC's hard disk. Give the file a meaningful
name.
Windows: Postscript Emulation Driver • 291
NOTE
is displayed and only one
DISK FULL
then
File Print
option is switched on in your
Print To File
Properties...
tab.
from the drop-down list, then make your
.
This should open the
.
OK