Oki ES 1624n MFP User Manual page 132

Printout is garbled or incorrect with parallel connection.
Possible cause
Possible mismatch
on parallel
connection between
computer and printer.
Cannot print.
•
LPT WRITE ERROR
•
PRNUSBX WRITE ERROR
Possible cause
Interface is disabled.
Printer is switched
OFF.
Printer interface
cable is
disconnected.
A converter, buffer,
extension cable or
USB hub is being
used.
Printer driver output
port is incorrect.
Printer is not selected
in the printer driver.
Incorrect printer
driver is being used.
Remedy
Change parallel transmission mode (see
"Problem Solving" on page 127).
is displayed.
is displayed.
Remedy
In the printer menu settings, enable the Parallel
interface (
PARALLEL MENU
) or the USB interface (
ENABLE
→
USB ENABLE
Turn on the printer.
Reconnect the printer interface cable.
Test by connecting the printer and computer
directly.
Set correct output port to which the printer
interface cable is connected.
Select the printer or set to default printer.
Delete this printer driver and install correct printer
driver from the Drivers CD supplied with your
printer.
Troubleshooting • 132
→
PARALLEL
USB MENU
).
→
→