Oki ES1624nMFP Safety Information Manual

Safety, Warranty, and Regulatory Information. . . . . . . . . . . 1
Informations de sécurité, de garantie et de réglementation . 13
Información de Seguridad, Garantía, y Reglamentaria . . . . 24
Informações sobre segurança, garantia e normativas . . . . 37

Safety Information

Your OKI product has been carefully designed to give you
years of safe, reliable performance. As with all electrical
equipment, there are a few basic precautions you should take
to avoid hurting yourself or damaging the product.
• Carefully read the provided setup and operating instructions.
• Save all provided documentation for future reference.
• Read and follow all warning and instruction labels on the
product itself.
• Unplug the product before you clean it. Use only a damp
cloth; do not use liquid or aerosol cleaners.
• Place your product on a firm, solid surface. If you put it on
something unsteady, it may fall and be damaged. If you
place it on a soft surface, such as a rug, sofa, or cushion, the
vents may be blocked, causing the product to overheat.
• Protect your product from overheating. Make sure no
obstructions block the openings of the product. Do not put
the product on or near a heat source (such as a radiator or
heat register). Keep the product out of direct sunlight.
• Always use this product in a well ventilated area. Allow
enough room around the product for adequate ventilation
and easy access to the paper trays. If you put the product in
any kind of enclosure, make sure the enclosure is well
ventilated.
• Do not use your product near water. Do not spill liquid of any
kind into it.
• Be certain that your power source matches the rating listed
on the back of the product. If you are not sure, check with
your dealer or with your local power company.
• Do not connect this product to an uninterruptible power
supply (UPS). For further information please contact Oki
Data at 1-800-OKI-DATA.
• Your product has a grounded, three-prong plug as a safety
feature. This plug only fits into a grounded outlet. If the plug
does not fit, the outlet may be an older, non-grounded type.
Contact an electrician to have the outlet replaced. Do not
use an adapter to defeat the grounding.
• Install the product near an easily accessed power outlet.
• Avoid damaging the power cord. Do not put anything on it or
place it where it will be walked on. If the cord becomes
damaged or frayed, replace it immediately.
• If you are using an extension cord or power strip with the
product, make sure that the total of the amperes required by
all the equipment on the extension is less than the
extension's rating. The total ratings of all equipment plugged
into the outlet should not exceed 15 amperes.
®
OKI ES1624nMFP
• Do not poke anything into the ventilation slots of the
• Aside from the routine maintenance described in the
• Do not make any adjustments other than those outlined in
If anything happens that indicates that your product is not
working properly or has been damaged, unplug it immediately
and follow the procedures in the provided documentation for
having your product serviced.
Here are some of the things to look for.
• The power cord or plug is frayed or damaged.
• Liquid has been spilled into the product, or the product has
• The product has been dropped, or the cabinet is damaged.
• The product does not function normally when you are
product. You could get an electrical shock or cause
hazardous electrical arcing, which could cause a fire.
documentation, do not try to service the product yourself.
Removing the cover may expose you to shocks or other
hazards.
the documentation. You may cause damage that will require
extensive repair work. The provided documentation explains
how to get your product serviced by qualified Oki Data
technicians.
been exposed to water.
following the operating instructions.