Network Setup - D-Link DCS-5025L User Manual

Section 3 - Configuration
This section allows you to configure your network settings.
DHCP: Select this connection if you have a DHCP server running on your
network and would like a dynamic IP address to be assigned to
your camera automatically.
Static IP Select this connection type if your Internet Service Provider (ISP)
Client: or network administrator has provided you with a static or fixed
IP address and other network information for your camera. Click
on the Static IP Address radio button to activate this method.
IP Address: The fixed IP address
Subnet Mask: The default value is "255.255.255.0." Used to
determine if the destination is the same subnet.
Default Gateway: The gateway used to forward data to
destinations in a different subnet. Invalid gateway settings may
cause the failure of transmissions to a different subnet.
Primary DNS: Primary domain name server that translates
names to IP addresses.
Secondary DNS: Secondary domain name server to backup
the Primary DNS.
PPPoE: If you need to connect to the Internet using a PPoE connection,
click on the PPPoE radio button and enter the username and
password provided to you by your Internet Service Provider or
Network Administrator.
D-Link DCS-5025L User Manual

Network Setup

32 32