Image Setup - D-Link DCS-5025L User Manual

Section 3 - Configuration
This section allows you to configure the image settings for your camera.
Enable
If you have lights flickering in your camera video, try enabling
Antiflicker:
antiflicker. Otherwise, you should leave this disabled.
Flip Image:
Select this box to vertically flip the video.
Mirror:
Horizontally flip the video.
Note: If the camera is installed upside down, Flip Image and
Mirror should both be checked
Brightness
Allows you to adjust the brightness level. Select a setting
Control:
between -5 and +5.
Contrast
Allows you to adjust the contrast level. Select a setting between
Control:
-5 and +5.
Saturation
Allows you to adjust the saturation level. Select a setting
Control:
between -5 and +5.
D-Link DCS-5025L User Manual

Image Setup

38 38