Internet Connection Setup Wizard - D-Link DCS-5025L User Manual

Section 3 - Configuration
This wizard will guide you through a step-by-step process to configure your
new D-Link Camera and connect the camera to the Internet.
Click Next to continue.
Select what kind of Internet connection your camera should use:
• DHCP Connection (Default): If you are connected to a router, or
are not sure which connection to use, select DHCP Connection.
• Static IP Address: This will allow you to manually enter your
network settings for the camera. Select this option if your Internet
Service Provider or network administrator has provided you with
a set of predefined IP addresses. If you are not sure what settings
to enter, check with your Internet Service Provider or network
administrator.
• PPPoE Connection: If your camera is directly connected to a
DSL modem, you may need to use PPPoE. Enter the username
and password provided to you by your Internet Service Provider.
Click Next to continue.
D-Link DCS-5025L User Manual

Internet Connection Setup Wizard

30 30