Network - D-Link DCS-935L User Manual And Service Information

Section 3 - Configuration
This section allows you to configure your network settings.
DHCP Select this connection if you have a DHCP server running on your network and
Connection: would like a dynamic IP address to be updated to your camera automatically.
Static IP Address: You may obtain a static or fixed IP address and other network information from
your network administrator for your camera.
IP Address: Enter the IP address that the camera will use on your network. You
may need to get this information from your ISP or network administrator.
Subnet Mask: The default value is "255.255.255.0. " Used to determine if the
destination is part of the same subnet.
Default Gateway: The gateway used to forward frames to destinations in a
different subnet. Invalid gateway settings may cause the failure of transmissions
to a different subnet.
Primary DNS: Primary domain name server that translates names to IP addresses.
Secondary DNS: Secondary domain name server to backup the Primary DNS.
PPPoE Settings: If you are using a PPPoE connection, enable it and enter the User ID(username)
and Password for your PPPoE account. You can get this information from your
Internet service provider (ISP).
D-Link DCS-935L User Manual

Network

25