Camera Control - D-Link DCS-5025L User Manual

Section 3 - Configuration
This section allows you to configure the pan and tilt operations of your camera. You can specify the lens location for the Home
button, and specify up to 24 pre-set lens locations, allowing you to quickly view these pre-determined areas of the camera's
range from the Live Video screen.
Pan/Tilt
Use the directional arrows on the wheel to move the camera
Wheel:
lens through its pan and tilt ranges.
Set as Home: Click this button to set the current lens location as the Home
location. Once set, the camera will return to this location
whenever the Home button in the center of the pan/tilt wheel
is clicked.
Default Clicking on this button returns the Home location to the factory
Home:
default setting.
Pan Step:
Select the increment of movement for each press of a pan (up/
down)arrow on the pan/tilt wheel.
Tilt Step:
Select the increment of movement for each press of a tilt (left/
right) arrow on the pan/tilt wheel.
Preset
The camera allows you to specify up to 24 pre-determined lens
Position:
positions, which can be used to quickly move the camera's view
to areas of interest.
• Select the number of the position that you would like to
specify.
• Use the pan/tilt wheel to move the camera's lens to the
desired preset position.
D-Link DCS-5025L User Manual

Camera Control

51 51