Xerox WorkCentre 3655 User Manual page 198

Maintenance
5. When lifting the printer, grasp the areas as shown.
Notes:
• When moving the printer, do not tilt it more than 10 degrees to the front, back, left, or right.
Tilting the printer more than 10 degrees can cause toner spillage.
• Repack the printer and its options using the original packing material and boxes or a Xerox
Repackaging Kit. For a repacking kit and instructions, go to
www.xerox.com/office/WC3655support.
CAUTION:
Failure to repackage the printer properly for shipment can result in damage not covered
®
by the Xerox Warranty, Service Agreement, or Total Satisfaction Guarantee. The Xerox
Service Agreement, or Total Satisfaction Guarantee do not cover damage to the printer caused by
improper moving.
After moving the printer:
1. Reinstall any parts you removed.
2. Reconnect the printer to the cables and power cord.
3. Plug in and turn on the printer.
®
198 Xerox WorkCentre
User Guide
®
3655/3655i Multifunction Printer
®
Warranty,