Makita EH5000W Technical Information page 7

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -5. Shear Blade
DISASSEMBLING
Remove Holder and Shear blade assembly by unscrewing two Hex socket head bolts (Fig. 10).
Note: 2 pcs. of Sleeve 5 are mounted under Plate. Do not lose them (Fig. 12)
Fig. 10
Spur gear 43
Holder
Gear case
Seal
ASSEMBLING
(1) Align the Shear blade (upper) with the lower one (Fig. 11).
(2) Set 2 pcs. of Sleeve 5 under Plate of Shear blade assembly (Fig. 12).
(3) Set the position of Spur gear 43 as described in Fig. 13.
Fig. 11
Fig. 13
Hex socket head bolt
Washer
Fig. 12
Shear blades
Note:
Holder and Washer are fastened with Hex socket
head bolts. Do not lose them when removing
Shear blade assembly.
Plate
Sleeve 5
Shear blades
P 7/ 26