Makita EH5000W Technical Information page 6

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -3. Clutch Drum
ASSEMBLING
(1) Lock Spur gear 9 with 1R374 (Fig. 6).
(2) Drive Clutch drum to the shaft of Spur gear 9 counterclockwise by hand.
(3) Mount 1R373 to Clutch drum and fasten it counterclockwise with impact driver and 13 mm Hex socket bit (Fig. 7).
Note: 1. Do not lose Friction plate next to Rod when mounting Clutch drum.
2. Replace Gear case gasket to the new one.
[3] -4. Spur Gear 9
DISASSEMBLING
Remove Spur gear 9 (Fig. 8).
Fig. 8
Apply 1R024 to Shaft
of Spur gear 9 and
press it with Arbor press.
Gear case
ASSEMBLING
Assemble Spur gear 9 (Fig. 9).
Fig. 9
Put Gear housing on the turn base of Arbor press horizontally.
Insert Spur gear 9 into Ball bearing in Gear case and press it with Arbor press.
Shaft of
1R024
Spur gear 9
Now, Spur gear 9 is disassembled.
Gear case complete
P 6/ 26
Spur gear 9