Makita EH5000W Technical Information page 13

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -6. Ignition
ASSEMBLING
Fly Wheel
(1) Remove oil completely from Crankshaft.
(2) Align Woodruff key on Crank shaft to the key groove of Fly wheel and mount Fly wheel to Crankshaft.
(3) Turn M6 Hex nut to Crankshaft clockwise by hand and tighten it with Impact driver with 10 mm Socket bit
clockwise for 2 second.
Fig. 25
[3] -7. Recoil Starter
DISASSEMBLING
(1) Remove Recoil starter assembly from Blower housing.
Note: Record the position and the pulling direction of Starter knob before disassembling (Fig. 26).
Fig. 26
Lever case side
Starter knob
Pulling direction
Remove Oil completely
from Crankshaft.
Woodruff Key
Align this Key to the groove in the Fly wheel.
Recoil starter assembly
P 13/ 26
Blade side