Makita EH5000W Technical Information page 16

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -8. Carburetor
DISASSEMBLING, CLEANING
(1) Remove Air cleaner cover (Fig. 30).
(2) Remove Elements; Sponge and Felt (Fig. 31).
Fig. 30
Air cleaner
cover
(3) Remove two Hex socket head bolts fixing Air cleaner plate and Carburetor assembly (Fig. 32).
Note; Take off the Hex socket head bolts completely from the machine,
otherwise, it's impossible to disassemble Carburetor.
(4) Remove two tubes and disassemble Carburetor assembly (Fig. 32).
Fig. 32
Air cleaner plate
(5) Remove Diaphragm cover, Metaling diaphragm, Gasket set by unscrewing four Pan head screws (Fig. 33).
Note; Carefully separate Gasket from Metaling diaphragm in case they stick each other as they are fragile.
(6) Replace Metaling diaphragm to the new one if it has any curing, deformation or breakage.
Fig. 33
Throttle valve
assembly
Pan head screw (small)
Hex socket
head bolt
Pump diaphragm Inlet
screen
Gasket
Carburetor
Pump body assembly
body assembly
Fig. 31
Element
(Felt made)
Element
(Sponge made)
Clear Tube
Black
Tube
Metaling
diaphragm
Gasket
P 16/ 26
Hex socket
head bolt
Carburetor
assembly
Diaphragm
cover
Pan head screw (4pcs.)