Makita EH5000W Technical Information page 19

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -8. Carburetor (cont.)
ASSEMBLING CARBURETOR TO ENGINE
(2) Fasten the following parts with two Hex socket head bolts (Fig. 39).
* Plate
* Air cleaner plate
* Gasket
* Cable bracket
* Gasket
* Carburetor assembly
* Carburetor gasket
Fig. 39
Air cleaner plate
Hex socket head bolt
(3) Assemble Elements (Fig. 40).
Fig. 40
1. First, assemble Felt element,
and then, Sponge element.
Air cleaner cover
2. Fit the tab of Air cleaner plate with the
square hole of Air cleaner cover and
fasten Air cleaner cover with a screw.
Starter case
Cable
bracket
Gasket
Plate
Assemble plate to Air
cleaner plate, facing its
triangle side to Starter
case side.
Air cleaner plate
Element
(felt)
Element
(sponge)
Carburetor gasket
Assemble Carburetor gasket,
facing its cut portion to
Loop handle side.
Carburetor
assembly
Gasket
Make sure that Gaskets
are mounted to the both
side of Cable bracket.
Square hole
for tab
P 19/ 26
Tab of Air
cleaner plate