Technical Data; Main Components - Power Craft 48000 Instruction Manual

INSTRUCTION MANUAL
Introduction
To get the most out of your new mitre saw,
please read these instructions and the attached
safety instructions before use. Please keep the
instructions in a safe place in case you need to
refer to them later. Go to www.powercraft.com
for further information on our products.

Technical data

Voltage/frequency:
Power rating:
Free rotation speed:
Max. cutting width
at 90°:
on 45° mitre:
on 45° bevel:
on 45° mitre + bevel:
Blade size:
No. of teeth:
Weight:
Acoustic pressure:
Sound output
ENGLISH
230 V ~ 50 Hz
1,050 W
4,500 RPM
height 60 mm,
width 120 mm
height 60 mm,
width 85 mm
height 30 mm,
width 120 mm
height 30 mm,
width 85 mm
diameter 210 mm,
hole diameter 18 mm,
width 2.5 mm
24 (carbide)
7.8 kg
94.5 dB(A)
107.5 dB(A)

Main components

1. Release latch
2. On/off button
3. Handle
4. Blade guard
5. Saw blade
6. Guide
7. Saw table
8. Graduated scale
9. Mitre adjustment screw
10. Base
11. Holes for table extensions
12. Angle gauge (on rear of saw)
13. Bevel adjustment bolt (on rear of saw)
14. Extractor nozzle pipe
15. Top
19