Circular cross-cut and mitre box saw Safety regulations 3. Proper use The EMS 210 circular cross-cut and mitre box saw is Always pull the plug out of the power socket designed for the cross-cutting of timber and plastic before adjusting or servicing the machine.
Page 10
Anleitung EMS 210 GB 24.10.2001 11:39 Uhr Seite 7 Operators have to be at least 18 years of age. Always press the workpiece firmly against the Trainees of at least 16 years of age are allowed table and the stop rail to prevent it from moving to use the machine under supervision.
Anleitung EMS 210 GB 24.10.2001 11:39 Uhr Seite 8 Check that the moving parts work properly and „The quoted values are emission values and not do not jam or whether any of the parts are necessarily reliable workplace values. Although there damaged.
(13) with (Fig. 7) the hex wrench (12). The EMS 210 can be used to make mitre cuts on the Check that the voltage marked on the rating left at an angle of 0°-45° relative to the work top and plate is the same as your mains voltage and 0°-45°...
Anleitung EMS 210 GB 24.10.2001 11:39 Uhr Seite 10 Important! The cutting bevel of the teeth, i.e. the direction of rotation of the saw blade, has to conform with the direction of the arrow marked on the housing. Clean the saw blade flanges thoroughly before mounting the saw blade.
Anleitung EMS 210 GB 24.10.2001 11:39 Uhr Seite 12 WARRANTY CERTIFICATE The guarantee period begins on the date of sales and is valid for 1 year. Responsibility is assumed for faulty construction or material or functional defects. Any necessary replacement parts and necessary repair work are free of charge.