Advertisement
MITRE SAW
TECHNICAL SPECIFICATIONS
Voltage
| 230 V~
Frequency
| 50 Hz
Power input
| 1050 W
No load speed
| 4500/min
Saw blade dimensions
| 210 x 18 mm
Max. cuttingdepth 90°
| 120 x 60 mm
Max. cuttingdepth 45°
| 80 x 60 mm
Weight
| 7,2 kg
Lpa (sound pressure)
| 91,2 dB(A)
Lwa (acoustic power)
| 104,2 dB(A)
Vibration
| 2,5 m/s
2
PRODUCT INFORMATION
Fig.A
1. Grip with switch
2. Unlocking button
3. Motor housing (cover graphite brushes)
4. Saw blade attachment
5. Saw blade safety cover
6. Guiding adjusting screws
7. Saw table
8. Degree scale
9. Fastening holes
11. Protective cover
12. Table inlay
2
SAFETY INSTRUCTIONS
The following symbols are used in these instructions for
use:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of the
instructions in this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
ELECTRICAL SAFETY
Always check that the power supply corresponds to
the voltage on the rating plate.
Replacing cables or plugs
Immediately throw away old cables or plugs when they
have been replaced by new ones. It is dangerous to insert
the plug of a loose cable in the wall outlet.
Using extension cables
•
The grinding machine is fitted with a three-core cable
and earthed plug. Therefore, always connect the plug
to an earthed socket. If you have to use an extension
cable, make sure it is three-core and fitted with an
earthed plug and connector.
•
The minimum conductor size is 1.5 mm
2
.
GENERAL SAFETY INSTRUCTIONS
Warning! When using electric tools, basic safety pre-
cautions should always be followed to reduce the
risk of fire, electric shock and personal injury, inclu-
ding the following. Read all these instructions before
attempting to operate this product.
Retain for future refence.
1. Keep work area clean
Cluttered areas and benches invite injuries.
2. Consider work area environment
Don't expose power tools to rain. Don't use power
tools in damp or wet locations. Keep work area well
lit. Don't use power tools in presence of flammable
liquids or gases.
3. Guard against electric shock
Prevent body contact with grounded surfaces (e.g.
pipes, radiators, ranges refrigerators).
4. Keep children away
Do not let visitors contact tool or extension cord. All
visitors should be kept away from work area.
5. Store idle tools
When not is use, tools should be stored in dry, high,
or locked-up place, out of reach of children.
6. Don't force tool
It will do the job better and safer at the rate for which
it was intended.
Powercraft
EXPLODED VIEW
Powercraft
11
Advertisement
